Three white VEEB 3D printed cases for a 2.7 inch epaper are in a line. Above them are hex screws and bolts in black silver and gold, plus an allen key.
Four VEEB 3D printed case are laid out in a mixture of colour, neon yellow, white, orange and grey.
Four VEEB 3D printed case are laid out in a mixture of colours - white, peach and faux wood.
Four VEEB 3D printed case are laid out in a mixture of colours - white, light grey and dark grey.
VEEB 3D Printed case in white and neon yellow on 2.7inch epaper display sat next to a stack of cassette cases for scale. Next to them is a pile of gold hex screws and bolts, plus an allen key.
VEEB 3D Printed case in white and neon yellow for a 2.7inch epaper sat next to a stack of cassette cases for scale. Next to them is a pile of gold hex screws and bolts, plus an allen key.
Rear view of a 3D printed epaper case in neon green. A white micro USB cable is connected to a Raspberry Pi Zero.
Three white VEEB 3D printed cases for a 2.7 inch epaper are in a line. Above them are hex screws and bolts in black silver and gold, plus an allen key.
Four VEEB 3D printed case are laid out in a mixture of colour, neon yellow, white, orange and grey.
Four VEEB 3D printed case are laid out in a mixture of colours - white, peach and faux wood.
Four VEEB 3D printed case are laid out in a mixture of colours - white, light grey and dark grey.
VEEB 3D Printed case in white and neon yellow on 2.7inch epaper display sat next to a stack of cassette cases for scale. Next to them is a pile of gold hex screws and bolts, plus an allen key.
VEEB 3D Printed case in white and neon yellow for a 2.7inch epaper sat next to a stack of cassette cases for scale. Next to them is a pile of gold hex screws and bolts, plus an allen key.
Rear view of a 3D printed epaper case in neon green. A white micro USB cable is connected to a Raspberry Pi Zero.

ePaper Enclosure

from CHF 29.00

If you’ve built one of our projects, using a 2.7 inch e-paper screen and Raspberry Pi Zero and fancy making it look slick, this kit will fit it like a glove.

The kit includes:

  • 1 x 3D Printed Front Plate

  • 1 x 3D Printed Back Plate

  • 4 x Hex Screws Plus Bolts

  • 1 x Allen Key

Optional Add-On

  • Raspberry Pi Back Plate

  • 1m Micro USB Cable with 90° connector

* e-paper and Raspberry Pi not included

Raspberry Pi Back-Plate:
Micro USB Cable *90 degree connector:

If you’ve built one of our projects, using a 2.7 inch e-paper screen and Raspberry Pi Zero and fancy making it look slick, this kit will fit it like a glove.

The kit includes:

  • 1 x 3D Printed Front Plate

  • 1 x 3D Printed Back Plate

  • 4 x Hex Screws Plus Bolts

  • 1 x Allen Key

Optional Add-On

  • Raspberry Pi Back Plate

  • 1m Micro USB Cable with 90° connector

* e-paper and Raspberry Pi not included

You Might Also Like